What is Bondo glazing and spot putty used for?
This spot and glazing putty is ideal for spot repairs and other small repairs to auto body panels. Use it for filling pinholes in body filler as well as for covering minor sand scratches, and more on metal, fiberglass and wood as well as sanded and primed or sanded and painted surfaces.
How long does it take Bondo glazing and spot putty to dry?
Allow the putty to cure for 30 minutes or until hard to the touch.
Does Bondo glazing and spot putty shrink?
Bondo® Professional Glazing & Spot Putty (PDF, 59.1 Mb) quickly repairs paint scratches, minor dents and stone chips. Our professional quality formula comes as a two-part product with putty and cream hardener to produce a mixture that won’t shrink once cured.
Can you paint over Bondo glazing and spot putty?
Unlike many 2-part putties which can require longer to dry, Bondo Glazing & Spot Putty is sandable in as little as 30 minutes. It is non-staining, so it won’t affect the color of paint or finishes around the repair area. This spot and glazing putty is ideal for spot repairs and other small repairs to auto body panels.
Can you use spot putty over primer?
You can use glaze putty over primer. Either pin holes or lows or something that pops up after it’s been primed on occasion. Let me give you one hint to help you, and you may be doing this, but use a Guide Coat in your body filler stages.
Do you need hardener for glazing spot putty?
Applying Spot Putty It is very easy to sand, dries fast and doesn’t need a hardener to cure. You can just apply it from the tube. I usually use Glazing & Spot Putty by 3M. Use a plastic spreader to put a thin coat of spot putty on the sanded area.
How thick can glazing putty be?
Filler should not be applied more than 1/4″ thick, any more and there is a risk it will crack. With that said, any damage less than 1/4″ deep may not need to be hammered out.
Does spot putty need hardener?
Spot putty is another type of filler that is used to fill tiny pinholes in the body filler. If you don’t fill those pinholes, the filler might crack when there is any movement of the underlying metal. It is very easy to sand, dries fast and doesn’t need a hardener to cure. You can just apply it from the tube.
What is spot putty made of?
The putty is a basic component of a plumber’s toolkit and is often used when replacing plumbing fixtures. Plumber’s putty formulations vary but commonly include powdered clay and linseed oil. Other formulas use limestone, talc, or fish oil.
Is Bondo putty waterproof?
Bondo Fiberglass Resins and Repair Kits are 100 percent waterproof. Bondo Ultimate can be applied directly over sanded and cured primer and paint. This filler remains easy to sand for days after the application.
Do you have to prime glazing putty?
Tips. Always prime a bare sash with an oil-based primer prior to glazing. Wait until the glazing putty has formed a skin (3-4 days for Type-M putty or 2-3 weeks for Dual Glaze putty) before you attempt to paint. Do not prime the glazing putty after you have glazed your window.
